header

KSEP TYPE EMERGENCY VENT COVER

Thursday - 11/03/2021 12:51

According to API 2000 Code :

The series KSEP is designed to provide emergency pressure relief for storage tanks when exposed to overpressures that are not handled by standard tank vents.
These vents provide the capacity to meet API standard 2000 for emergency venting due to fire exposure when properly sized.
These covers also provide quick easy access for tank inspection and maintenance.


 

Vent Operation :

The KSEP emergency pressure relief vent provides pressure relief only.
Vacuum relief must be supplied by normal venting devices, or use our KSEV emergency pressure and vacuum relief vent covers.
When excessive pressure builds within the storage tank the KSEP series emergency pressure relief vent begin to open at a predetermined set pressure relieving excessive pressure.
When the overpressure has dissipated the cover reseat onto the base.


Construction :

The series KSEP is available in several materials that are corrosion resistant to most petroleum product applications.
See Standard material of construction table for available material.
Predetermined setting range is from a minimum of 50mm W.C to a maximum of 700mmW.C
Sizes are 400, 450, 500 and 600mm with flange drilling according to ANSI 150lb or API650


 

KSEP TYPE EMERGENCY VENT COVER
 KSEP 설치.

Total notes of this article: 0 in 0 rating

Click on stars to rate this article

  Reader Comments

You did not use the site, Click here to remain logged. Timeout: 60 second