The model KSEPKJ is designed to provide emergency pressure relief for storage tanks when exposed to overpressures that are not handled by standard tank vents. These vents provide the capacity to meet API standard 2000 for emergency venting due to fi re exposure when properly sized. These covers also provide quick easy access for tank inspection and maintenance.

---

The model KSEPKJ is designed to provide emergency pressure relief for storage tanks when exposed to overpressures that are not handled by standard tank vents. These vents provide the capacity to meet API standard 2000 for emergency venting due to fi re exposure when properly sized. These covers also provide quick easy access for tank inspection and maintenance.

The model KSEPW is designed to provide emergency pressure relief for storage tanks when exposed to overpressures that are not handled by standard tank vents. These vents provide the capacity to meet API standard 2000 for emergency venting due to fi re exposure when properly sized. And it provides quick easy access for tank inspection and maintenance. And also designed to be Cushioned Air Seating, Tefl on(FEP+PTFE) diaphragm are standard. The excessive pressure over 75% of set point builds up to 90% of set point, the Liquid (Silicon oil) catch up the Leakage and meet bubble tight (no leakage) at 90% of set pressure. It is designed to be self closing under normal operation by inside Guide and the restraining cables to connect the Cover A'ssy and Flange.

---

The model KSEPW is designed to provide emergency pressure relief for storage tanks when exposed to overpressures that are not handled by standard tank vents. These vents provide the capacity to meet API standard 2000 for emergency venting due to fi re exposure when properly sized. And it provides quick easy access for tank inspection and maintenance.

And also designed to be Cushioned Air Seating, Tefl on(FEP+PTFE) diaphragm are standard. The excessive pressure over 75% of set point builds up to 90% of set point, the Liquid (Silicon oil) catch up the Leakage and meet bubble tight (no leakage) at 90% of set pressure. It is designed to be self closing under normal operation by inside Guide and the restraining cables to connect the Cover A'ssy and Flange.

Situations that demand a Rupture Disc

• In case there is any concern that there can be an abrupt rise in pressure that cannot be endured by a spring type safety valve.

• In case there is any concern that fixtures generated by the operation state may damage the operation function of other safety materials owing to excessive pressure.

• In case the leakage of oil reserved in a tank from a safety device is not permitted during an operation.

• In case there is a need to have a protective device in preparation for a container and pipe that reserves or produces oil of a strong corrosive nature.

• In case of handling or reserving materials that are likely to undergo a synthetic reaction.

• In case there is a possibility that an excessively high or low temperature in the operational environment might inhibit the operation of a safety valve.

---

Situations that demand a Rupture Disc

• In case there is any concern that there can be an abrupt rise in pressure that cannot be endured by a spring type safety valve.

• In case there is any concern that fixtures generated by the operation state may damage the operation function of other safety materials owing to excessive pressure.

• In case the leakage of oil reserved in a tank from a safety device is not permitted during an operation.

• In case there is a need to have a protective device in preparation for a container and pipe that reserves or produces oil of a strong corrosive nature.

• In case of handling or reserving materials that are likely to undergo a synthetic reaction.

• In case there is a possibility that an excessively high or low temperature in the operational environment might inhibit the operation of a safety valve.

---

N2 Blanket gas controller helps gas pressure to maintain in constant state in the vapor space of storage Tanks. When liquid run out from storage vessel or vacuum state take place because of temperature dropping, N2 Blanket gas controller has a ability of control desired pressure within the fixed limits.
Besides above subjects, prevents air and humidity from entering into storage vessel, So it can preserve products, and also protect from a fire.
It protects the tank from explosion by restricting spark.
It prevents the outflow of fluid by evaporation

---

N2 Blanket gas controller helps gas pressure to maintain in constant state in the vapor space of storage Tanks. When liquid run out from storage vessel or vacuum state take place because of temperature dropping, N2 Blanket gas controller has a ability of control desired pressure within the fixed limits.
Besides above subjects, prevents air and humidity from entering into storage vessel, So it can preserve products, and also protect from a fire.
It protects the tank from explosion by restricting spark.
It prevents the outflow of fluid by evaporation

---

N2 Blanket gas controller helps gas pressure to maintain in constant state in the vapor space of storage Tanks. When liquid run out from storage vessel or vacuum state take place because of temperature dropping, N2 Blanket gas controller has a ability of control desired pressure within the fixed limits.
Besides above subjects, prevents air and humidity from entering into storage vessel, So it can preserve products, and also protect from a fire.
It protects the tank from explosion by restricting spark.
It prevents the outflow of fluid by evaporation

---

Situations that demand a Rupture Disc

• In case there is any concern that there can be an abrupt rise in pressure that cannot be endured by a spring type safety valve.

• In case there is any concern that fixtures generated by the operation state may damage the operation function of other safety materials owing to excessive pressure.

• In case the leakage of oil reserved in a tank from a safety device is not permitted during an operation.

• In case there is a need to have a protective device in preparation for a container and pipe that reserves or produces oil of a strong corrosive nature.

• In case of handling or reserving materials that are likely to undergo a synthetic reaction.

• In case there is a possibility that an excessively high or low temperature in the operational environment might inhibit the operation of a safety valve.

---

GENERAL DESCRIPTION :

Designed for gauging the height of liquid levels, measuring the depth of water bottoms, taking temperature, and taking sample of liquids held in storage tank, without relieving pressure within the tank. It avoids the loss of valuable vapors, and exposing the gauger to excessive fumes.
Quick opening valve unit is opened and closed simply by moving a lever through a 90℃ arc.
A by-pass is provided to equalize in the tank and sampling chamber unit, if this should be necessary for easy opening.
The window in the top cover of the gauging unit can be provided with an inside wiper, to insure clear vision of the gauge taper, and to permit the taking of accurate reading.reading.

---

INSTALLATION

1. Mount the KSSD Series Sampling Device on  4” or 8” flange roof nozzle.
2. Attach the gauging bob or sampling bottle to the swivel snap inside the sampling chamber unit.
3. Check the distance from the bottom of the bob to a point above the snap on the tape to make certain a correct reading is obtained.
 

GENERAL DESCRIPTION :

The KSSD Series Sampling Device is designed for gauging the height of liquid levels, measuring the depth of water bottoms, taking temperature, and taking sample of liquids held in storage tank, without relieving pressure within the tank.
It avoids the loss of valuable vapors, and exposing the gauger to excessive fumes.
Quick opening valve unit is opened and closed simply by moving a lever through a 90deg C arc.
A by-pass is provided to equalize in the tank and sampling chamber unit, if this should be necessary for easy opening.
The window in the top cover of the gauging unit can be provided with an inside wiper, to insure clear vision of the gauge taper, and to permit the taking of accurate reading.

---

GENERAL DESCRIPTION :

The Sampling and Gauging Hatch Cover of the Model KSGE type are designed, manufactured and tested according to the KSPC standard code.
The Model KSGH is made to take the fluid samples from the storage tank, to measure the temperature, and to take test of the stored fluids.

---

GENERAL DESCRIPTION :

The Sampling and Gauging Hatch Cover of the Model KSGH type are designed, manufactured and tested according to the KSPC standard code.
The Model KSGH is made to take the fluid samples from the storage tank,
to measure the temperature, and to take test of the stored fluids.
The model KSGH is used under 0.05 kg/cm2 pressure of storage tank.

---

According to API 2000 Code :

The series KSEPR/EPS is designed to provide emergency pressure relief for storage tanks when exposed to overpressures that are not handled by standard tank vents.
These vents provide the capacity to meet API standard 2000 for emergency venting due to fire exposure when properly sized.
These covers also provide quick easy access for tank inspection and maintenance.

---

Vent Operation :

The KSEPR/EPS emergency pressure relief vent provides pressure relief only.
Vacuum relief must be supplied by normal venting devices, or use our KSEV emergency pressure and vacuum relief vent covers.
When excessive pressure builds within the storage tank the KSEPR/EPS emergency pressure relief vent begin to open at a predetermined set pressure relieving excessive pressure.
When the overpressure has dissipated the cover reseat onto the base..

Construction :

The series KSEPR/EPS is available in several materials that are corrosion resistant to most petroleum product applications.
See Standard material of construction table for available material.
The KSEPR is a weighted pallet model designed to handle pressure with a minimum pressure of 20mmW.C and a maximum setting of 700mmW.C
The KSEPS is a spring loaded model designed to handle pressure with a minimum pressure of 700mmW.C and a maximum setting of 7,000mmW.C

According to API 2000 Code :

The series KSEPK is designed to provide emergency pressure relief for storage tanks when exposed to overpressures that are not handled by standard tank vents.
These vents provide the capacity to meet API standard 2000 for emergency venting due to fire exposure when properly sized.
These covers also provide quick easy access for tank inspection and maintenance.

---

Vent Operation :

The KSEPK emergency pressure relief vent provides pressure relief only.
Vacuum relief must be supplied by normal venting devices, or use our KSEV emergency pressure and vacuum relief vent covers.
When excessive pressure builds within the storage tank the KSEPK series emergency pressure relief vent begin to open at a predetermined set pressure relieving excessive pressure.
When the overpressure has dissipated the cover reseat onto the base.

Construction :

The series KSEPK is available in several materials that are corrosion resistant to most petroleum product applications.
See Standard material of construction table for available material.
Predetermined setting range is from a minimum of 50mm W.C to a maximum of 700mmW.C
Sizes are 400, 450, 500 and 600mm with flange drilling according to ANSI 150lb or API650.

According to API 2000 Code :

The series KSEVK is designed to provide emergency pressure vacuum relief for storage tanks when exposed to over pressures and over vacuum that are not handled by standard tank vents.
These vents provide the capacity to meet API standard 2000 for emergency venting due to fire exposure when properly sized.
These covers can also be easily lifted open, providing a large, unobstructed passage for rapid entry and quick easy access to the tank for tank inspection and maintenance

---

Vent Operation :

The KSEVK emergency pressure relief vent provides pressure vacuum relief .
When excessive pressure builds within the storage tank the KSEVK series emergency pressure relief vent begin to open at a predetermined set pressure relieving excessive pressure.
When the overpressure has dissipated the cover reseat onto the base.

Construction :

The series KSEVK is available in several materials that are corrosion resistant to most petroleum product applications.
See Standard material of construction table for available material.
Predetermined pressure / vacuum setting range is from a minimum of 25/-25mmW.C to a maximum of 700/-700mmW.C
Sizes are 400, 450, 500 and 600mm with flange drilling according to ANSI 150lb or API650.

According to API 2000 Code :

The series KSEV is designed to provide emergency pressure vacuum relief for storage tanks when exposed to over pressures and over vacuum that are not handled by standard tank vents.
These vents provide the capacity to meet API standard 2000 for emergency venting due to fire exposure when properly sized.
These covers also provide quick easy access for tank inspection and maintenance.

---

Vent Operation :

The KSEV emergency pressure relief vent provides pressure vacuum relief .
When excessive pressure builds within the storage tank the KSEV series emergency pressure relief vent begin to open at a predetermined set pressure relieving excessive pressure.
When the overpressure has dissipated the cover reseat onto the base.

Construction :

The series KSEV is available in several materials that are corrosion resistant to most petroleum product applications.
See Standard material of construction table for available material.
Predetermined pressure / vacuum setting range is from a minimum of 25/-25mmW.C to a maximum of 700/-700mmW.C
Sizes are 400, 450, 500 and 600mm with flange drilling according to ANSI 150lb or API650.

According to API 2000 Code :

The series KSESV is designed to provide emergency pressure vacuum relief for storage tanks when exposed to overpressures and overvacuum that are not handled by standard tank vents.
These vents provide the capacity to meet API standard 2000 for emergency venting due to fire exposure when properly sized.

---

Vent Operation :

The KSES emergency pressure relief vent provides pressure and vacuum relief..
When excessive pressure builds within the storage tank the KSESV series emergency pressure relief vent begin to open at a predetermined set pressure relieving excessive pressure.
When the overpressure has dissipated the cover reseat onto the base.

Construction :

The series KSESV is available in several materials that are corrosion resistant to most petroleum product applications.
See Standard material of construction table for available material.
Predetermined pressure setting range is from a minimum of 700mm W.C to a maximum of 7,000mmW.C and vacuum setting range is from a minimum of -20 mmW.C to maximum of
-700 mmW.C.
Sizes are 400, 450, 500 and 600mm with flange drilling according to ANSI 150lb or API650.

According to API 2000 Code :

The series KSES is designed to provide emergency pressure relief for storage tanks when exposed to overpressures that are not handled by standard tank vents.
These vents provide the capacity to meet API standard 2000 for emergency venting due to fire exposure when properly sized.

---

Vent Operation :

The KSES emergency pressure relief vent provides pressure relief only.
Vacuum relief must be supplied by normal venting devices, or use our KSESV emergency pressure and vacuum relief vent covers.
When excessive pressure builds within the storage tank the KSES series emergency pressure relief vent begin to open at a predetermined set pressure relieving excessive pressure.
When the overpressure has dissipated the cover reseat onto the base.

Construction :

The series KSES is available in several materials that are corrosion resistant to most petroleum product applications.
See Standard material of construction table for available material.
Predetermined setting range is from a minimum of 700mm W.C to a maximum of 7,000mmW.C
Sizes are 400, 450, 500 and 600mm with flange drilling according to ANSI 150lb or API650

According to API 2000 Code :

The series KSEP is designed to provide emergency pressure relief for storage tanks when exposed to overpressures that are not handled by standard tank vents.
These vents provide the capacity to meet API standard 2000 for emergency venting due to fire exposure when properly sized.
These covers also provide quick easy access for tank inspection and maintenance.

---

Vent Operation :

The KSEP emergency pressure relief vent provides pressure relief only.
Vacuum relief must be supplied by normal venting devices, or use our KSEV emergency pressure and vacuum relief vent covers.
When excessive pressure builds within the storage tank the KSEP series emergency pressure relief vent begin to open at a predetermined set pressure relieving excessive pressure.
When the overpressure has dissipated the cover reseat onto the base.

Construction :

The series KSEP is available in several materials that are corrosion resistant to most petroleum product applications.
See Standard material of construction table for available material.
Predetermined setting range is from a minimum of 50mm W.C to a maximum of 700mmW.C
Sizes are 400, 450, 500 and 600mm with flange drilling according to ANSI 150lb or API650

---

Model KSBGFH /GSFH, which is used for the protector of fluid storage tank, is composed of one body with the functions of pressure relief, vacuum relief, and to block the external repellent fire.
This is consist of the flame arrester which blocks the external repellent fire, the function of discharge the overpressure developed during intake air to the storage tank, and the function of intake the air under the constant pressure during unloading. And this is the safe valve to prevent the many kinds of storage tank from the deflation (vacuum), inflation ( pressure ) and fire.
The standard flame cell is suitable for NEC group D or IEC IIA gases, Cells for other gas groups are available as additional extras.
The KSBGFH is a weighted pallet model designed to handle pressure and vacuum with a minimum pressure of +/-20mmW.C and a maximum setting of +700/-430 mmW.C
The KSGSFH is a spring loaded model designed to handle pressure and vacuum with a minimum pressure of +/-700mmW.C and a maximum setting of +/- 9,000mmW.C.
Body materials are available in Aluminium, Carbon Steel, 304SS and 316SS with various trims to suit individual requirements.
Sizes range from 50mm through to 350mm with ANSI 150lb flanges as standard.
(Different connections available on request).
The valves with flame arrester have additional FM factory mutual approval for the majority of sizes and materials.

---

Model KSBGFI /GSFI, which is used for the protector of fluid storage tank, is composed of one body with the functions of pressure relief, vacuum relief, and to block the external repellent fire.
This is consist of the flame arrester which blocks the external repellent fire, the function of discharge the overpressure developed during intake air to the storage tank, and the function of intake the air under the constant pressure during unloading. And this is the safe valve to prevent the many kinds of storage tank from the deflation (vacuum), inflation ( pressure ) and fire.
The standard flame cell is suitable for NEC group D or IEC IIA gases, Cells for other gas groups are available as additional extras.
The KSBGFI is a weighted pallet model designed to handle pressure and vacuum with a minimum pressure of +/-20mmW.C and a maximum setting of +700/-430 mmW.C
The KSGSFI is a spring loaded model designed to handle pressure and vacuum with a minimum pressure of +/-700mmW.C and a maximum setting of +/- 9,000mmW.C.
Body materials are available in Aluminium, Carbon Steel, 304SS and 316SS with various trims to suit individual requirements.
Sizes range from 50mm through to 350mm with ANSI 150lb flanges as standard.
(Different connections available on request).

---

Model KSBBFH /BSFH, which is used for the protector of fluid storage tank, is composed of one body with the functions of pressure relief, vacuum relief, and to block the external repellent fire.
This is consist of the flame arrester which blocks the external repellent fire, the function of discharge the overpressure developed during intake air to the storage tank, and the function of intake the air under the constant pressure during unloading. And this is the safe valve to prevent the many kinds of storage tank from the deflation (vacuum), inflation ( pressure ) and fire.
The standard flame cell is suitable for NEC group D or IEC IIA gases, Cells for other gas groups are available as additional extras.
The KSBBFH is a weighted pallet model designed to handle pressure and vacuum with a minimum pressure of +/-20mmW.C and a maximum setting of + 700/-430 mmW.C
The KSBSFH is a spring loaded model designed to handle pressure and vacuum with a minimum pressure of +/-700mmW.C and a maximum setting of +/- 9,000mmW.C.
Body materials are available in Aluminium, Carbon Steel, 304SS and 316SS with various trims to suit individual requirements.
Sizes range from 50mm through to 350mm with ANSI 150lb flanges as standard.
(Different connections available on request).
The valves with flame arrester have additional FM factory mutual approval for the majority of sizes and materials.

---

Model KSBBFI /BSFI, which is used for the protector of fluid storage tank, is composed of one body with the functions of pressure relief, vacuum relief, and to block the external repellent fire.
This is consist of the flame arrester which blocks the external repellent fire, the function of discharge the overpressure developed during intake air to the storage tank, and the function of intake the air under the constant pressure during unloading. And this is the safe valve to prevent the many kinds of storage tank from the deflation (vacuum), inflation ( pressure ) and fire.
The standard flame cell is suitable for NEC group D or IEC IIA gases, Cells for other gas groups are available as additional extras.
The KSBBFI is a weighted pallet model designed to handle pressure and vacuum with a minimum pressure of +/-20mmW.C and a maximum setting of + 700/-430 mmW.C
The KSBSFI is a spring loaded model designed to handle pressure and vacuum with a minimum pressure of +/-700mmW.C and a maximum setting of +/- 9,000mmW.C.
Body materials are available in Aluminium, Carbon Steel, 304SS and 316SS with various trims to suit individual requirements.
Sizes range from 50mm through to 350mm with ANSI 150lb flanges as standard.
(Different connections available on request).

---

FEATURES / BENEFITS

Flame Trap A’ssy of KSPC makes no difference though it is installed in line of horizontality or perpendicularity. Fuse has an element which is made of metal, and to be melted easy. So it can intercept flame within 15 seconds at 260 deg F (=127 deg C)
You can see the position of valve disc stem at outside though heat resisting plate glass, so you can confirm whether valve is opened or closed. Also disassembly and cleaning of flame element is convenient and we can repair fast and it doesn’t need disassembly by exchange.

MAINTENANCE

Periodic inspection and maintenance is required. The cell assembly can be removed for cleaning purposes. Cleaning ban be accomplished by dipping the entire cell assembly into an appropriate solvent. Care should be taken not to damage the cell openings as such deformations hamper the flow through the cell. The gaskets should be inspected and replaced if necessary.

---

The KSFE unit gives the protection needed. For size 4” and under after ignition of the out flowing gases a fusible element melts, the spring loaded cover automatically opens and the full surface of the flame arrester is exposed so that the flame arrester element will not attain the ignition temperature through heat absorption.
The standard flame cell is suitable for NEC group D or IEA IIA gases. Cells for other gas groups are available as additional extras.
The standard design shall be used up to an operating temperature of + 90 deg C / 140 deg F and operating pressure up to 1.1 bar abs from size ½” / 15A to 20” / DN 500. Upon request, it can be obtained for higher pressure and higher temperature with special approval.
Housing construction are Aluminium, Cast Iron, Cast Steel, 304SS, and 316LSS. Hood construction is stainless steel and the element is 316LSS.
Sizes are from 20mm through to 500mm.
Cast iron and cast steel units are epoxy coated both inside and outside.

MAINTENANCE

Periodic inspection and maintenance is required. The cell assembly can be removed for cleaning purposes. Cleaning ban be accomplished by dipping the entire cell assembly into an appropriate solvent. Care should be taken not to damage the cell openings as such deformations hamper the flow through the cell. The gaskets should be inspected and replaced if necessary.